GLOBAL MATERIAL TECHNOLOGIES -- OOPS!, 710744  -- 6850-00N091567
<pre>=====================  Product Identification  =====================

Product ID:OOPS!, 710744
MSDS Date:08/27/1998
FSC:6850
NIIN:00N091567
Status Code:A
=== Responsible Party ===
Company Name:GLOBAL MATERIAL TECHNOLOGIES
Address:1540 DUNDEE RED SUTIE 210
City:PALATINE
State:IL
ZIP:60623
Country:US
Info Phone Num:888-468-9665
Emergency Phone Num:800-255-3924
CAGE:TO137
=== Contractor Identification ===
Company Name:GLOBAL MATERIAL TECHNOLOGIES
Address:1540 DUNDEE RED SUTIE 210
Box:City:PALATINE
State:IL
ZIP:60623
Country:US
Phone:888-468-9665
CAGE:TO137

=============  Composition/Information on Ingredients  =============

Ingred Name:TOLUENE, O-CHLORO-; (MONOCHLOROTOLUENE (MIXED ISOMERS))
CAS:95-49-8
RTECS #:XS9000000
&lt; Wt:7.
ACGIH TLV:259 MG/M3;50 PPM

Ingred Name:ETHYL ALCOHOL
CAS:64-17-5
RTECS #:KQ6300000
&lt; Wt:12.
OSHA PEL:1900 MG/M3;1000 PPM
ACGIH TLV:1880 MG/M3;1000 PPM

Ingred Name:XYLENE (MIXED ISOMERS)
CAS:1330-20-7
RTECS #:ZE2100000
&gt; Wt:21.
ACGIH TLV:434 MG/M3;100 PPM
ACGIH STEL:651 MG/M3;150 PPM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:LIGHT ALIPHATIC SOLVENT NAPHTHA (PETROLEUM). VM & P NAPTHA
CAS:64742-89-8
&gt; Wt:58.
ACGIH TLV:100 PPM

=====================  Hazards Identification  =====================

Effects of Overexposure:SEE HEALTH HAZARDS.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO AREA FREE OF VAPORS & SUPPORT/RESTORE
    BREATHING. SEEK MEDICAL
ATTENTION IMMEDIATELY. INGEST: DO NOT INDUCE VOMITING! IF VOMITING
    SPONTANEOUSLY
OCCURS, KEEP VICTIM'S HEAD BELOW THE HIP S TO PREVENT ASPIRATION INTO
    LUNGS.
SEEKMEDICAL ATTENTION IMMEDIATELY. EYES: FLUSH WITH WATER FOR AT LEAST
    15 MINUTES.
SEEK MEDICAL ATTENTION IMMEDIATELY. SKIN: REMOVE CONTAMINATED CLOTHING
    & WASH
AFF ECTED AREA WITH SOAP & WATER. DO NOT REUSE CONTAMINATED ARTICLES.
    SEEK MEDICAL
ATTENTION IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:=10.C, 50.F
Extinguishing Media:WATER FOG, FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:KEEP CONTAINERS COOL WITH WATER. PRESSURE
    BUILD-UP COULD RESULT IN CONTAINER RUPTURE. VAPOR IS HEAVIER THAN
    AIR.

==================  Accidental Release Measures  ==================

Spill Release Procedures:FOR LG SPILLS, EVACUATE HAZ AREA OF
    UNPROTECTED PERS. WEAR APPROP NIOSH APPRVD RESP
& PROT CLTHG. SHUT OFF SOURCE OF LEAK IF SAFE TO DO SO. DIKE & CNTN. IF
    VAP CLOUD FORMS,
WATER FOG MAY BE USED TO SU PPRESS. CNTN RUN-OFF. REMOVE W/VACUUM
    TRUCKS/PUMP TO
STOR/SALVAGE VESSELS. SOAK UP RESIDUE W/ABSORB SUCH AS CLAY, SAND/OTHER
    SUITABLE MATL.
PLACE IN NON-LEAKING CNTNRS. SEAL TIGHTLY FOR PROPER DISP.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP PRODUCT CONTAINERS COOL, DRY &
    AWAY FROM SOURCES OF IGNITION. USE & STORE
W/ADEQUATE VENT IN PROPERLY LABELED, CLOSED CONTAINERS. AVOID
    INHALATION OF VAPORS
& SKIN CONTACT. DO NOT TAKE INTERNALLY .
Other Precautions:DISPOSAL CONTAINERS MUST BE SEALED TIGHTLY & PROPERLY
    LABELED. DO NOT EAT, DRINK OR
SMOKE IN WORK AREA. WASH HANDS THORUGHLY OUGHLY AFTER USE.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:IF EXPOSURE EXCEEDS, TLV, USE NIOSH APPROVED
    RESPIRATOR.
Ventilation:USE EXPLOSION-PROOF VENTILATION AS REQUIRED TO CONTROL
    VAPOR CONCENTRATIONS.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:EYE WASH & DELUGE SHOWER MEETING ANSI DESIGN
    CRITERIA .
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE. BEFORE
    DRINKING, EATING OR SMOKING.
Supplemental Safety and Health
BP: 22.8C,73F (REPRESENTS LOWEST BOILING OF INDIVIDUAL RAW MATERIALS).
    SPEC GRAV: 6.627 POUND PER GALLON (WATER =1)

==================  Physical/Chemical Properties  ==================

Boiling Pt:=22.8C, 73.F
B.P. Text:SUPDAT
Vapor Density:>1 (AIR=1)
Spec Gravity:0.79 
Evaporation Rate &amp; Reference:<1 (ETHER =1)
Solubility in Water:INSOLUBLE
Appearance and Odor:THIN COLORED LIQUID/SOLVENT WITH SWEET PERFUME
    ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CHLORINATED COMPOUNDS AND OXIDIZING MATERIALS.
Stability Condition to Avoid:HEAT, HOT SURFACES AND ALL SOURCES OF
    IGNITION.
Hazardous Decomposition Products:CHLORINE GAS, HCL & OTHER CHLORINATED
    CMPDS, CARBON DIOXIDE, CARBON MONOXIDE & UNIDENTIFIED ORGANICS MAY
    BE FORMED DURING COMBUSTION.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT FLUSH INTO SEWERS OR WATERWAYS. DISPOSE
    OF IN ACCORDANCE WITH LOCAL, COUNTY,
STATE AND FEDERAL REGULATIONS.

===================  MSDS Transport Information  ===================

Transport Information:HAZARD CLASS: ORM-D. DOT SHIPPING NAME: CONSUMER
    COMMODITY. UN NUMBER: N/A. OTHER: THE ORM-D CLASSIFICATION APPLIES
    TO CONTAINERS UNDER ONE GALLON IN SIZE AND IS NOT APPLICABLE TO AIR
    SHIPMENT.

=======================  Other Information  =======================

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.